
4
5
3
CAMERA SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
FOCUS MODE
DIGITAL ZOOM
IMAGE FLIP
<
WHITE BALANCE SETUP>
<AUTO EXPOSURE SETUP>
BACK
EXIT
CAMERA SETUP
1
Setup the general functions of zoom camera module. Setup the video related function of zoom camera module.
WB SETUP
2
WB SETUP - Set WB Mode to Manual
3
If WB mode changes to ‘MANUAL’, the value of ‘RED ADJUST’ and
‘BLUE ADJUST’ shows on the screen.
WB SETUP - Change WB Colour Value
4 5
-
If WB mode changes to ‘MANUAL’, the colour value of ‘RED ADJUST’
and ‘BLUE ADJUST’ can be set up manually.
- To save data and exit, press near key.
Press Near Key,
Joystic Down
Joystic Down
> > > >
FOCUS MODE
Sets camera focus mode.
- SEMIAUTO: This mode exchanges focus mode automatically between
manual focus mode and auto focus mode. Manual focus mode activates
in preset operation and auto focus mode activates when jog operation
starts.
- MANUAL: With manual mode at presets, focus data is memorized in
each preset in advance and camera calls focus data in correspondence
with presets as soon as camera arrives at a preset.
AUTO / MANUAL / SEMIAUTO
DIGITAL ZOOM
Sets digital zoom function to ‘ON’ or ‘OFF’. If this is set to ‘OFF’, optical
zoom function runs but zoom function stops at the end of optical zoom
magnification.
IMAGE FLIP
Sets if the image should be reversed or not.
ON / OFF
ON / OFF
<WHITE BALANCE SETUP>
Move to ‘WHITE BALACE SETUP’ screen.
<AUTO EXPOSURE SETUP>
Move to ‘AUTO EXPOSURE SETUP’ screen.
WB MODE
Red and blue level can be set up manually only in manual mode.
AUTO / MANUAL
RED ADJUST
Adjust the red color value. It can be set only in manual mode.
BLUE ADJUST
Adjust the blue color value. It can be set only in manual mode.
10 ~ 60
10 ~ 60
AE SETUP
2
BACKLIGHT
Sets the backlight compensation.
OFF / LOW / MIDDLE / HIGH
MANUAL IRIS SCREEN
3
IRIS LEVEL
0 ~ 100
MANUAL SHUTTER SCREEN
4
SHUTTER SPD
AUTO DSS SCREEN
5
DSS LIMIT
x128 ~ 1/120000
x2 ~ x128
DAY/NIGHT
‘AUTO1’ exchanges day/night mode faster than ‘AUTO2’.
AUTO1 / AUTO2 / DAY / NIGHT
BRIHGTNESS
Adjusts the brightness of images.
IRIS
- If iris is set to ‘AUTO’, iris should have highest priority in adjusting AE
and shutter speed should be fixed.
- If iris is set to ‘MANUAL’, iris should be fixed and iris has lower priority
in adjusting AE, in comparison with others.
0 ~ 100
AUTO / MANUAL
SHUTTER
- If iris is set to ‘MANUAL’ and shutter speed is set to ‘ESC’, shutter speed
should have highest priority.
- Shutter speed is set to ‘A. FLICKER’, to remove flicker, shutter speed
should be set to 1/100 sec. for NTSC and 1/120 for PAL.
ESC / A.FLICKER / MANUAL
AGC
Enhances the image brightness automatically in case that luminance level
of image signal is too low.
OFF / NORMAL / HIGH
SSNR
Enhances the images by deducting noises when gain level of images is
too high.
OFF / LOW / MIDDLE / HIGH
DSS
- Activates the slow shutter function when luminance of image (signal) is
too dark.
- It is possible to set up the maximum number of frames piled up one on
another by Slow Shutter function.
AUTO / OFF
1
2
SEMIAUTO
ON
OFF
WB SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
WB MODE
- RED ADJUST
- BLUE ADJUST
BACK
EXIT
AUTO
- - -
- - -
WB SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
WB MODE
- RED ADJUST
- BLUE ADJUST
BACK
EXIT
MANUAL
3 0
4 0
WB SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
WB MODE
- RED ADJUST
- BLUE ADJUST
BACK
EXIT
MANUAL
3 0
4 0
WB SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
WB MODE
- RED ADJUST
- BLUE ADJUST
BACK
EXIT
MANUAL
3 0
4 0
CAMERA SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
FOCUS MODE
DIGITAL ZOOM
IMAGE FLIP
<
WHITE BALANCE SETUP>
<AUTO EXPOSURE SETUP>
BACK
EXIT
>
1
2
SEMIAUTO
ON
OFF
AE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
BACKLIGHT
DAY/NIGHT
BRIGHTNESS
IRIS
SHUTTER
AGC
SSNR
DSS
BACK
EXIT
OFF
AUTO 1
2
5
AUTO
ESC
NORMAL
MIDDLE
OFF
5
AUTO DSS
- - - - - - - - - - - - - - - - - - - - - - - - - - -
DSS LIMIT
EXIT
x2
4
MANUAL SHUTTER
- - - - - - - - - - - - - - - - - - - - - - - - - - -
SHUTTER SPD
EXIT
x2
3
MANUAL IRIS
- - - - - - - - - - - - - - - - - - - - - - - - - - -
IRIS LEVEL
EXIT
0
Press
Near/Enter
Key
Press
Near/Enter
Key
Press
Near/Enter
Key
OSD - CAMERA SETUP>WB SETUP
35
OSD - CAMERA SETUP>AE SETUP
3
34
Comentarios a estos manuales