Videcon Concept Pro VHSD-810EXT Manual de usuario descargar pdf (Pagina 15)

EDIT PATTERN 1

[NEAR:SAVE / FAR:DELETE]

0/0/x1/E

EDIT PATTERN 1

- - - - - - - - - - - - - - - - - - - - - - - - - - -

MOVE TO START POSITION

[NEAR:START/ FAR:CANCEL]

0/0/x1/E

EDIT PATTERN 1

[NEAR:SAVE / FAR:DELETE]

0/0/x1/E

EDIT PATTERN 1

TIME LIMITE...

1st POS.

1. CW direction

2. CCW direction

2st POS.

FUNCTION SETUP

- - - - - - - - - - - - - - - - - - - - - - - - - - -

BACK

EXIT

FUNCTION SETUP

- - - - - - - - - - - - - - - - - - - - - - - - - - -

BACK

EXIT

VST SETUP

- Up to 8 VST are available, which makes the camera to move

slowly between two preset positions.

When VST function runs, the camera moves from the preset

assigned

as the 1st pos. to the preset assigned as the 2nd pos.

in CW(Clockwise) direction. Then camera moves from the preset

assigned as the 2nd pos. to the preset assigned as the 1st pos.

in CCW(Counterclockwise) direction. Then, it continues to move

from the 1st pos. to the 2nd pos. back and forth.

PATTERN SETUP

It records the free path of camera by joystic control.

VST SETUP

- - - - - - - - - - - - - - - - - - - - - - - - - - -

VST NO.

1ST POS.

2ST POS.

VST SPEED

CLEAR VST

BACK

EXIT

NOT USED

/SEC

CANCEL

PATTERN SETUP

- - - - - - - - - - - - - - - - - - - - - - - - - - -

PATTERN NO.

CLR PATTERN

EDIT PATTERN>

BACK

EXIT

UNDEFINED

CANCEL

> > > >

VST NO.

Select VST number to edit. If a selected VST is defined, 2 presets will be

displayed in the 1st position and the 2nd position.

1 ~ 8

1ST POS.

Set up the 1st position for scan function. If a selected preset is not defined,

‘UNDEFINED’ will be displayed as shown below.

Undefined preset cannot be assigned as position. If you press near key

when the selected preset is ‘UNDEFINED’, the preset will returned to

previous position(Available preset or ‘NOT USED’).

PRESET 1 ~ 128, NOT USED

PATTERN NO.

Select pattern number to edit. If a selected pattern number is not defined,

‘UNDEFINED’ will be displayed under selected pattern number.

1 ~ 4

CLR PATTERN

Deletes data in the current pattern.

Moves to edit the pattern assigned.

CANCEL / OK

EDIT PATTERN - Select the Position

2ST POS.

Same as the 1st pos. setup.

PRESET 1 ~ 128, NOT USED

VST SPEED

Sets the VST speed.

1/SEC ~ 180/SEC

CLEAR VST

Deletes the data in current VST.

CANCEL / OK

If the 1st POS. = the2nd POS.

In case that the preset assigned as the 1st pos. is same as the

preset assigned as the 2nd pos., camera turns on its axis by 360

in CW direction and then it turns on its axis by 360° in CCW direction.

If one preset is not defined between the 1st POS. and the 2nd POS.

If case that a position assigned is ‘NOT USED’, camera turns on

its axis by 360

° in CW direction from the preset which is

‘NOT USED’ and then it turns on its axis by 360

° in CCW direction.

VST SETUP

- - - - - - - - - - - - - - - - - - - - - - - - - - -

VST NO.

1ST POS.

2ST POS.

SCAN SPEED

PRESET 1

NOT USED

/SEC

UNDEFINED

1. By using joystick, move to start position.

2. By using joystick, move to the appropriate zoom.

3. To start pattern recording, press near key.

EDIT PATTERN -

Records the Path

1. Move camera with joystick of controller or run preset function

to memorize the path (mostly curve path) in a selected pattern.

2. The total memory size and the rest memory size is displayed in

the form of bar. (Refer screen 5)

If bar is full as below, the camera does not record any more

paths.

The pattern path includes the zoom magnification.

3. To save data and exit, press near key.

To cancel recording and delete the recorded data, press far key.

Select <EDIT PATTERN>,

Press Near/Enter Key

When pattern is edited or ok, pan/tilt will turn to ‘AUTO FLIP>

OFF’ temporarily.

Press

Near/Enter

Key

Press

Near/Enter

Key

Move Camera to Area,

Press Near/Enter Key

Record the Path of the Pattern

by Camera Control

OSD - FUNCTION SETUP>VST SETUP

OSD - FUNCTION SETUP>PATTERN SETUP

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Comentarios a estos manuales

Sin comentarios

Videcon Concept Pro VHSD-810EXT Manual de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Videcon Concept Pro VHSD-810EXT