Videcon Concept Pro VHSD-810EXT Manual de usuario Pagina 13
- Pagina / 22
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
ALARM INPUT SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
ALARM 1 N.O
ALARM 2 N.O
BACK
EXIT
MOTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PRESET LOCK
PWR UP ACTION
AUTO FLIP
JOG MAX SPEED
JOG DIRECTION
FRZ IN PRESET
<
PARKING ACTION SETUP>
<ALARM INPUT SETUP>
BACK
EXIT
>
1
2
OFF
ON
ON
140/SEC
NORMAL
OFF
NOT USED
NOT USED
> >
3
4
5
NOT USED
NOT USED
ALARM INPUT SETUP
2
If an external sensor is activated, camera will move to
corresponding action.
ALARM INPUT SETUP - Type Setup
3
1. Move joystick Up/Down to set alarm type.
2. Move joystick Left/Right to set alarm action.
ALARM INPUT SETUP - Alarm Action Setup
4 5
1. Move joystick Up/Down to set the action(HOME, PRESET, VST,
PATTERN, GROUP) and no.
2. On screen 5, move joystick Left/Right to move the focus to set
alarm type, function name and function no.
3. By pressing near key, save the current setting.
Alarm Type:
Alarm Action
- Sets sensor input type.
- Refer page 14 for more detailed information.
N.O(Normal Open) / N.C(Normal Close)
Assign counter-action to each alarm input. Among 149 actions, choose
the action as explained below.
NOT USED / HOME / PRESET 1~128 /
VST 1~8 / PATTERN 1~4 / GROUP 1~8
ALARM INPUT SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
ALARM 1 N.O
ALARM 2 N.O
BACK
EXIT
ALARM INPUT SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
ALARM 1 N.O
ALARM 2 N.O
BACK
EXIT
NOT USED
NOT USED
>
ALARM INPUT SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
ALARM 1 N.O
ALARM 2 N.O
BACK
EXIT
PRESET 1
NOT USED
MOTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PRESET LOCK
PWR UP ACTION
AUTO FLIP
JOG MAX SPEED
JOG DIRECTION
FRZ IN PRESET
<
PARKING ACTION SETUP>
<ALARM INPUT SETUP>
BACK
EXIT
OFF
ON
ON
140/SEC
NORMAL
OFF
MOTION SETUP
Setup the general functions of pan/tilt motions.
PRESET LOCK
PWR UP ACTION
If motion lock is set to on, it is impossible to set up and delete preset,
VST, pattern and group. It is possible only to run those functions.
To set up and delete those functions, enter into OSD menu.
ON / OFF
This function enables to resume the last action executed before power
down. Most of actions such as preset, pattern, VST and group are
available for this function but jog actions are not available to resume.
AUTO FLIP
In case that tilt angle arrives at the top of tilt orbit (90°), zoom module
camera keep moving to opposite tilt direction (180°) to keep tracing
targets. As soon as zoom module camera passes through the top of tilt
direction(90°), images should be reversed automatically and ‘
F ’ appears
in screen. If this function is set to ‘OFF’, tilt movement range is 0° ~ 90°
ON / OFF
ON / OFF
JOG MAX SPEED
Sets maximum jog speed. Jog speed is inversely proportional to zoom
magnification. As zoom magnification goes up, pan/tilt speed goes down.
JOG DIRECTION
If you set this to ‘INVERSE’, the view in the screen is moving same direction
with jog tilting. If ‘NORMAL’ is selected, the view in the screen is moving
reversely.
FRZ IN PRESET
At start point of preset movement, camera starts freezing the image of
start point. Camera keeps displaying the image of start point during
preset movement and does not display the images which camera gets
during preset movement. As soon as camera stops at preset end point,
camera starts displaying live images which it gets at preset end point.
This function availability should be different by models.
<PARKING ACTION SETUP>
Moves to ‘PARKING ACTION SETUP’ screen.
<ALARM INPUT SETUP>
Moves to ‘ALARM INPUT ACTION’ screen.
2/SEC ~ 360/SEC
INVERSE / NORMAL
ON / OFF
11
PARKING ACTOIN SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PARK ENABLE
WAIT TIME
PARK ACTION
BACK
EXIT
>
2
PARKING ACTION SETUP
2
If ‘PARK ENABLE’ is set to ‘ON’, camera runs assigned function
automatically if there is no PTZ command during assigned
‘WAIT TIME’.
PARK ENABLE
WAIT TIME
Enables/Disables ‘PARKING ACTION’.
ON / OFF
The time is displayed with "hh:mm:ss" format and you can change this
by 1 sec unit.
1. To place the cursor on the time marked as below, press near key.
2. Move joystick Left/Right to adjust hours, minutes and seconds.
3. Move joystick Up/Down to select the digit.
4. By pressing near key, save current setting.
PARKING ACTION
Select the action of parking. Move joystick Up/Down to choose the
appropriate action.
00:00:05 ~ 04:00:00
HOME / PRESET 1~128 / VST 1~8 /
PATTERN 1~4 / GROUP 1~8
OFF
00:10:00
HOME
00:10:00
Press
Near/Enter
Key
Press
Near/Enter
Key
Press
Near/Enter
Key
Joystick
Right
Joystick
Down
OSD - MOTION SETUP
25
OSD - MOTION SETUP
3
24
- Speed Dome System 1
- Concept Pro VHSD-810EXT 1
- Safety Information 2
- Precautions Contents 3
- User’s Manual 4
- 21 3 4 5 6 7 8 5
- Wire Cables 7
- 7P Terminal Block 8
- Check Points before Operation 9
- Main Functions 9
- OSD Information 10
- CONCEPT PRO SPEED DOME 11
- OSD - DISPLAY SETUP 12
- OSD - MOTION SETUP 13
- 1 2 3 4 5 6 7 8 9 0 14
- 0/0/x1/E 15
- > > > > 17
- SCHEDULE SETUP SCREEN 17
- OSD - SYSTEM SETUP 19
- OSD - SYSTEM INITIALISE 20
- Dimensions 20
- Dimensions of Option Brackets 21
- Specifications 22
Relacionado con productos y manuales para Cámaras De Seguridad Videcon Concept Pro VHSD-810EXT
(11 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.047 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales